Related Manuals for Kerstar KV 20
Summary of Contents for Kerstar KV 20
- Page 1 Operating Instructions KV20, 25, 30, 45 & 50 / 1 & 2 H Industrial Type H Vacuum Cleaners Please read carefully before use...
-
Page 2: Important User Information
IMPORTANT USER INFORMATION It is most important that this instruction book should be retained with the machine for future reference. Should the machine be sold or transferred to another user always ensure that the book is supplied with the machine in order that the new user can be acquainted with the functioning of the machine and the relevant warnings. -
Page 3: Electrical Information
ELECTRICAL INFORMATION This vacuum cleaner has been designed for dry vacuum cleaning only and must not be used to pick up any liquids. Cable & Plug These vacuum cleaners are Class 1 earthed machines and have 10 metres of 3 core supply cable with a moulded on impact resistant 10amp 3 pin NZ/AUS plug. - Page 4 UNPACkING yOUR CLEANER Unpack your cleaner and ensure that you have the items listed below: K4 Disposable Microfibre Bags – Part No. K18.01.02 14" High Efficiency Filter Assembly – Part No. K24.03.01 HOSE AND ACCESSORIES Supplied separately to customer requirements We recommend 32mm or 38mm hose and tools for single motor models (KV20, 25, 30, 45 &...
-
Page 5: Filtration System
Also known as the Absolute or Essential Filter. KV20–50H HEPA Filter part no. K27.03.04. Note: The HEPA cartridge filter fitted to Kerstar KV20–50 Type H models has a very large surface area compared to other models available and will therefore give improved performance and a greatly increased filter life. - Page 6 yELLOW FLASHING WARNING LIGHT This model is fitted with a yellow flashing LED warning light. When this light is flashing the airspeed in the hose has dropped below 20 metres per second. This would indicate that there is an impediment to the airflow. Remove hose.
-
Page 7: Maintenance
DUST/DEBRIS DISPOSAL This vacuum cleaner contains dust hazardous to health. Emptying and maintenance operations, including removal and renewal of dust collection bag, must only be carried out by authorised personnel wearing suitable personal protection. Do not operate without the full filtration system fitted. Disconnect the hose, fit the blanking cap on the hose entry, unlatch the clips and remove the motor head/HEPA unit. -
Page 8: Servicing & Spares
It must be thoroughly decontaminated in accordance with best practice before recycling. [ UK ] NN4 7HS 2/34 Hannigan Drive St John Tel: 095709604 www.kerstar.co.uk Auckland info.arenzltd@gmail.com Ref. Instruction Book ARE NZ KV20, 25, 30, 45, & 50 /1 & 2H 01/2016...