Steps
1. Place the power-supply unit on the chassis and slide it towards the back of the chassis.
2. Replace the three (M6-32) screws to secure the power-supply unit to the chassis.
3. Route the power-supply cables through their routing guides on the chassis.
4. Connect the power-supply cables to their connectors on the system board.
Next steps
1. Install the
disk-drive
cage.
2. Install the
3.5-inch hard drive
3. Install the
2.5-inch hard drive
4. Install the
front
bezel.
5. Install the
side
cover.
6. Follow the procedure in
Gruppo ventola del processore e dissipatore di calore
Rimozione del gruppo ventola del processore e dissipatore di calore
ATTENZIONE:
Le informazioni contenute in questa sezione sono destinate solo ai tecnici di assistenza
autorizzati.
Prerequisiti
1. Seguire le procedure descritte in
2. Rimuovere il
pannello
3. Rimuovere il
pannello
76
Rimozione e installazione di unità sostituibili sul campo (FRU)
if applicable.
if applicable.
After working inside your
Prima di effettuare interventi sui componenti interni del
laterale.
anteriore.
computer.
computer.