Kenwood KR-930 Instruction Manual page 9

Preset tuning
1. Press the AM or FM switch.
2. Press the PRESET STATION button for the desired sta-
tion.
3. Adjust the VOLUME CONTROL to the desired listening
level and use the BASS and TREBLE controls to adjust
the sound to suit your own taste.
Turntable
1. Press the PHONO switch.
2. Operate the turntable.
3. Adjust the VOLUME CONTROL to the desired listening
level and use the BASS and TREBLE controls to adjust
the sound to sult your own taste.
Tape decks
Tape playback
1. Press the TAPE A or TAPE B/AUX switch to select output
from tape deck connected to the TAPE A or TAPE B jacks.
2. Operate the tape deck.
3. Adjust the VOLUME CONTROL to desired listening level
and use the BASS and TREBLE controls to adjust the
sound to suit your own taste.
Tape monitoring
If your tape deck is equipped with three heads, you can
compare the sound quality of the recording in progress with
that of the source material by switching the appropriate
TAPE SELECTOR switch while the recording is being made.
Recording (one tape deck)
1. Press the AM, FM or PHONO switch for the desired pro-
gram source.
2. Set both TAPE SELECTOR switches to out position.
Tomonitor the recording, press the appropriate TAPE SE-
LECTOR switch depending on the set of jacks to which
your tape deck is connected.
3. Set up your tape deck for recording and set the recording
levels with the controls on your tape deck.
The VOLUME CONTROL on the receiver do not af-
fect the signal applied to the tape deck for recording pur-
poses.
4. Adjust listening level and tone at the receiver for your pre-
ference in monitoring the signal: these settings will not
affect the recording.
Recording (two tape decks)
1. Press the AM, FM or PHONO switch for the desired pro-
gram source.
2. Setboth TAPE SELECTOR switches to out position.
3. Set up your tape decks for recording and set recording
levels with the controls on your tape decks.
4. Recordings can now be made on both tape decks simul-
taneously.
Tomonitor these recordings, press the TAPE A switch.
Tape-to-tape dubbing
Tape recordings may be duplicated easily using tape deck
connected to TAPE B jacks to play the prerecorded tape and
tape deck connected to TAPE A jacks to record the copy.
Preset tuning
AM FM PHONO
Select AM or FM.
2
3 4 5
L_ PRESET STATION —— Pr ,
Press the PRESET STATION button.
Program source (>> q
For playback
(Tape deck A)
A B/AUX
For playback
(Tape deck B)
A B/AUX
a) i Le —
For recording
TAPE
A B/AUX
an Fa a Ee
For dubbing
A B/AUX
7. —_
TAPE B TAPEA
REC PLAY REC PLAY
Playback signal is supplied to the TAPE
A PLAY jacks, and is heard from the
speakers.
TAPE B TAPEA
REC PLAY REC PLAY
Playback signal is supplied to the TAPE B
PLAY jacks, and is heard from the
speakers.
TAPE B TAPEA
REC PLAY REC PLAY
© ©) © ©
es
The input signal selected by the INPUT
SELECTOR switch is always present at a
fixed level at the TAPE A and TAPE B
REC jacks.
TAPE B TAPEA
REC, PLAY REC, PLAY
Switch as shown to record a copy on
tape deck A from a tape played on tape
deck B. The recording can be monitored.
KR-930{k) 9