Kobalt KM211-06 Manual page 19

CARE AND MAINTENANCE
insulator washer, and the blade.
cutting edges toward the ground. Assemble the blade
nut, the square washer, and the insulator washer as
shown. Using a 15-mm socket or wrench, turn the
blade nut clockwise in order to secure the blade.
Note: Be sure to replace the parts in the exact order
in which they were removed. When installing the
cutting blade, verify that it is installed with the curved
ends pointing toward the mower deck, and not toward
the ground. Refer to the schematic drawing on page
20 of this manual.
Cleaning the mower
WARNING
other debris will accumulate causing rust and corrosion.
mower clean with a dry cloth occasionally.
the power supply. Tilt the mower forward, or on its side, and scrape it clean with an appropriate tool.
Storing the mower
The following steps should be taken to prepare the lawn
mower for storage.
corrosive materials, such as fertilizer and rock salt.
such as oil or stains. Replace extension cord if cut or
damaged in any way.
tangling.
reach of children. Do not cover lawn mower with a solid
plastic sheet. Plastic coverings trap moisture around the
mower causing corrosion.
the lower handle past the edges of the handle mounting brackets. Fold the lower handle forward.
Make sure not to bend or kink the power cord.
Washer
Square
washer
19
Blade
Blade nut