Advertisement
PRODUCT DESCRIPTION
- Mounting plate
- Solar panel
- PIR detector
- Startup button
- Light panel
- U-bolt
- Expansion bolt
- M6 flat washer
- M6 spring washer
- M6 nut
SPECIFICATIONS
| Solar panel | 9.5W, mono-crystalline silicon |
| Battery | 7.4V, 5.4 Ah, Li-ion |
| LED count | 40 |
| Brightness (Lumens) | 1,600 lm max |
| Recharge time | 6 hours full sunlight |
| Lighting time | 3 nights |
| Waterproof | IP65 |
| Install height | 8–11 ft (2.5~3.5 m) |
| Materials | PCB, poly-carbonate plastic, ABS plastic, glass |
| Size | 20.0 × 9.0 × 2.5 inches (508 × 229 × 64 mm) |
| Working temperature | −4°F to 122°F (−20°C to 50°C) |
| Warranty | 1 year |
FEATURES
- Flexible installation: pole or wall mounted
- Wide area lighting
- Adjustable installation angle
- Motion activating PIR sensor
- Energy saving lumination program
- Automatic On/Off
APPLICATIONS
Suitable for outdoor wall or pole installation in plazas, parks, gardens, courtyards, streets, walkways, pathways, campuses, airfields, farms, and perimeter security.
INITIAL ACTIVATION
Activate the light by pressing the button on the underside of the light (as shown above).
DEVICE INSTALLATION
Pole installation
As the above image shows: Take out the bolts and washers from the accessories bag for pole installation and attach the light to the pole with the U-bolts.
Wall installation
First, remove the U-bolts. Make 2 holes in the wall and take out the expansion bolt and washer. Attach the light onto the wall.
Please install the solar panel in a place without any shade and facing direct sunlight for better charging.
After installation, the light angle can be adjusted.
As shown in the diagram below.
OPERATION
First 5 hours:
1,600 lumens when motion is detected; dims to 100 lumens 20 seconds after no motion.
After 5 hours (or when battery is below 30%):
1,600 lumens when motion is detected; dims to 100 lumens 20 seconds after no motion; turns off after 5 minutes of no motion.
SPECIAL NOTE
- Please allow solar panel to charge in bright sunlight for over 5 hours before first time use.
- If the sunlight is not strong enough, it may take longer to fully charge the light. This is normal for solar products.
WARNINGS
- Keep the device away from fire and oil in order to avoid any explosion hazards.
- Avoid severe shock or impact.
- No one except professional technicians should attempt to disassemble the light in order to avoid damaging the light.
PACKAGE INCLUDES
Floodlight
2 × U-bolts
6 × M6 flat washers
6 × M6 spring washers
6 × M6 nuts
2 × Expansion Bolts
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download WAGAN Tech 8586 - Solar + LED Floodlight 1600 Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the 8586 that isn't answered in the manual? Leave your question here.