Pioneer XR-P260F Operating Instructions Manual page 22

RECORDING
eae ie
ne arenes a
Nal wii 2 |P3s fae)
A,B : Indicates the side of the tape.
1-7: indicates the number of the track.
- : Indicates the leader part of the tape.
1
The label printed
side is on the right.
4 5
CXonorF ASES/COPY
CU. on
Sa Q
6
|
22
<ARB7056>
A.S.E.S. (Auto Synchro Editing System}
a What is A.S.E.S.?
ALL : All discs recorded A.S.E.S.
@Two ASES modes are available ... ASES1 and ASES2.
in the ASES1 mode, recording is performed in the order of
tracks on a disc, or in the programmed playback order. In the
ASES2 mode, the first track on each disc is recorded in order.
Using the A.S.E.S. Function : |
1, Load discs in the CD player. (Refer to page 14.)
@Select ALL or SINGLE with the MODE/CD MODE button on
the remote control.
eUse the program function to record tracks in a specific
order.
eWhen recording beginning with a specific disc, use the
DISC SELECT button to select the disc number.
e Never insert more than one disc at a time into one slot. This
can scratch or damage the discs.
2. Press the CD function button.
Play starts automatically, so be sure to press the STOP
button.
3. Load a tape for recording into TAPE II.
Recording is in the forward direction.
@Wind the tape past its leader portion so that the magnetic
surface is exposed. (Refer to page 13.)
reduction mode,
5. Press the ASES/COPY button.
as follows:
> ASES 1
Lunn ASES 2 52)
When "ASES 2" is displayed, if you perform operation 6, the first
tracks only on each disc are recorded, and programs are canceled.
To cancel the A.S.E.S.:
Press the STOP button (m).
NOTES: