Pioneer XR-P260F Operating Instructions Manual page 21

| RECORDING
Recording on tape
Use only Type [ (Normai) tapes for recording.
1, Load a tape for recording into TAPE Il.
Wind the tape past its leader portion so that the magnetic
surface is exposed.
® Recording cannot be performed on a tape if the accidental
erasure prevention tab has been broken out,
elnsert the tape for recording and close the cassette door
with your hand.
2, Use the DOLBY NR ON/OFF button to select the desired
noise reduction mode.
*Each time the button is pressed, the mode changes in the
foilowing order:
> on > off
»: Recording on side A followed by recording on side B.
When recording in side A () has finished, recording on
side B (~) automatically starts.
~4: Recording on one side
Recording is performed in the reverse (4) direction, so be
sure to load the tape accordingly.
NOTES:
@ You cannot switch inputs during recording.
3. Press the ASES/COPY button.
The tape capy starts.
To stop copying:
21
<ARB7056>