National Instruments NI-9375 Getting Started page 9

Figure 4. Connecting a Flyback Diode
V
sup
DO
Flyback
Diode
DO COM
NI 9375
Connecting Wires to the NI-9375 with Spring
Terminal (Black Connector)
What to Use
NI-9375 spring terminal black connector
■
0.08 mm to 1.0 mm (28 AWG to 18 AWG) copper conductor wire with 7 mm
■
(0.28 in.) of insulation stripped from the end
Flathead screwdriver with a 2.3 mm x 1.0 mm (0.09 in. x 0.04 in.) blade,
■
included with the NI-9375
What to Do
Complete the following steps to connect wires to the spring terminal connector.
1
1. Insert the screwdriver into a spring clamp activation slot to open the
corresponding connector terminal.
External
+
Power
–
Supply
Inductive
Device
2 3
NI-9375 Getting Started
© National Instruments
9