High-Vibration Application Connections - National Instruments NI-9375 Getting Started

2. Press a wire into the open connector terminal.
3. Remove the screwdriver from the activation slot to clamp the wire into place.
Connecting Wires to the NI-9375 with Push-in Style
Spring Terminal (Black/Orange Connector)
What to Use
NI-9375 spring terminal black/orange connector
■
0.14 mm to 1.5 mm (26 AWG to 16 AWG) copper conductor wire with 10 mm
■
(0.394 in.) of insulation stripped from the end
Ferrules (optional)
■
What to Do
Refer to the following table for how to insert a wire into a terminal depending on
what type of wire you are using or if you are using a ferrule.
Option
When using a solid wire or stranded wire with a
ferrule
When using a stranded wire without a ferrule
Note
connecting more than one wire to a single terminal.

High-Vibration Application Connections

If your application is subject to high vibration, NI recommends that you use the
NI-9940 backshell kit to protect connections to the NI-9375 with spring terminal.
10
ni.com
You must use 2-wire ferrules to create a secure connection when
Description
Push the wire into the terminal when using a
solid wire or stranded wire with a ferrule
Press the push button and then push the wire
into the terminal
NI-9375 Getting Started