Sales Area Only); Screen - Kenwood DNX7120 Instruction Manual

C i (North American sales area only)
Various control screens appear in the Satellite radio source mode. (with the optional accessory Satellite
radio connected only. To connect the Sirius tuner, a conversion cable CA-SR20V (optional accessory) is
necessary and to connect the ×M tuner, an ×M interface Box KCA-×MIOOV (optional accessory) is necessary.)
• This document uses the SIRIUSdisplay as an example.
Switches to control screen to use various
functions.
......... -XX /f- ........
XM : Changes the display from Channel
Name, Song Title Name, to Category
Name.
Displays the ID number when Channel 0 is
selected.
Sirius : Displays the SIRIUS ID.
XM : Displays the RADIO ID.
i5 Tunes in a station.
i6 Switches the band.
i7 Switches the button display.
i8 Starts or stops Channel Scan (that tunes
channels one after the other).
i9 Switches the Seek mode.
SEEK 1: Tunes channels one after the other.
SEEK 2: Selects channels in memory one
after the other.
i10 Switches the number of lines displayed in
the Information Display.
ill Displays the Hands Free screen. (page 51)
ii2 Indicates current Seek mode
i13 When _ to _ buttons appear, you
can recall the channel on memory. For
memory of channel stations, see <Channel
Memory> (page 44).
ii4 You can tune in by entering the desired
channel number. See <Direct Channel
Search> (page 45)
i15 You can tune in by speci_ing the desired
category. See <Channel Search> (page 44)
i16j Displays the program information screen.
ii7 Displays the external device control
screen. See <External Device Power Supply
Control> (page 47).
jl] Band display
j2 Preset number
j3] Channel display
j4 Displays information concerning music
being played.
Sirius : Changes the display from Channel
Name, Song Title Name, Artist Name,
Composer Name, to Category Name.
English @ 43