Memory Bank Copy; Memory Bank Swap - Yaesu VR-500 Operating Manual

Memory Mode
This feature allows you to copy and paste the all Memory Channels in a particular Memory
Bank to a different Memory Bank.
•
Set the radio to the VFO mode by pressing the [CLR(P.SET)] key.
‚
Press the [ENT(SET)] key while pressing the [FUNC] key to activate the "Set" (Menu)
mode.
ƒ
Rotate the DIAL knob to select Menu #27 [Copy Bank].
„
Rotate the DIAL knob while pressing the [FUNC] key to en-
able the setup of Memory Bank Copy.
...
Key in the Source Memory Bank number (one digit) from
the keypad, then key in the Destination Memory Bank num-
ber (one digit) from the keypad.
†
Memory Bank Copy is now complete.
‡
Press the [CLR(P.SET)] key to exit to normal operation.
This feature allows to swap (exchange) all the Memory Channels in any two Memory
Banks.
•
Set the radio to the VFO mode by pressing the [CLR(P.SET)] key.
‚
Press the [ENT(SET)] key while pressing the [FUNC] key to activate the "Set" (Menu)
mode.
ƒ
Rotate the DIAL knob to select Menu #28 [Swap Bank].
„
Rotate the DIAL knob while pressing the [FUNC] key to en-
able the setup of Memory Bank Swap.
...
Key in the two Memory Bank numbers (each one digit) to be
swapped from the keypad.
†
Memory Bank Swap is now complete.
‡
Press the [CLR(P.SET)] key to exit to normal operation.
26
M B
EMORY ANK
M B
EMORY ANK
C
OPY
"Source" Bank
S
WAP
VR-500 O
PERATING
"Destination" Bank
M
ANUAL