Table of Contents
Advertisement
AC O
PERATION USING THE OPTIONAL
The VR-120D may be operated from your house
current by use of the optional PA-30 AC Adapter.
To use the PA-30, turn the radio off, then plug the
miniature connector of the AC Adapter into the
EXT DC jack on the side of the radio. Now plug
the AC Adapter into the wall outlet. You may now
turn on the radio.
Important Note!!
Do not leave the charger connected to the Receiver for continuous periods in excess of 30
hours. Long term overcharging can degrade the Ni-Cd battery pack and significantly
shorten its useful life.
r
To attach the supplied antenna to the VR-120D, grasp the base of
the antenna firmly, and exert a moderate "pinching" pressure on the
base as you press the antenna onto the radio's antenna connector.
While exerting this pressure, rotate the antenna clockwise 1/4 turn
to lock the antenna in place.
r
To remove the antenna from the VR-120D, grasp the base of the
antenna firmly, and pinch the base of the antenna while rotating the
antenna counter-clockwise 1/4 turn. You may now lift the antenna
away from the radio.
To install the Belt Clip, first place the loop of the Hand Strap into the groove at the top of the
Belt Clip, and run the loop of the strap around the round mounting ridge for the Belt Clip. Now
insert the mounting screw through the belt clip, and affix it snugly to the mounting hole on the
back of the VR-120D, being careful not to allow the Hand Strap to become mis-aligned.
Important Note!!
Do not install the supplied Belt Clip
Mounting Screw if you are not install-
ing the Belt Clip! Also, do not use an
improper screw for mounting the Belt
Clip! An improper screw may cause
a "short circuit" to the internal cir-
cuitry, causing serious damage!
VR-120D O
PERATING
Installation of Accessories
A
I
NTENNA
NSTALLATION
B
C
I
ELT
LIP
NSTALLATION
M
ANUAL
PA-30 AC A
E-DC-15
(Option)
DAPTER
to Cigarette lighter
to AC line outlrt
PA-30
(Option)
9
Hide quick links:
Advertisement
Table of Contents
