Advertisement
7
MAINTENANCE
Cleaning the shroud
Turn the dirt container
lid anti-clockwise
to remove.
Removing blockages from the TurboTool
Tap the post-motor filter
over a bin to release the dirt.
Remove the pre-motor filter
to allow access to the shroud.
40˚C
MAX
Wash the filter under
running water
(40 degree max)
Tap the shroud over a bin
to release dirt.
24hr
Leave to dry for 24 hours
and then replace before
using your vacuum.
40˚C
24hr
MAX
Wash the shroud under
running water and leave
to dry.
Advertisement
