Operation - Vanguard Dynamics VAIL CAST Faq

OPERATION

Do I have to use the controls on the front to operate the VAIL Cast?
For normal operating functions you do not need to use the front contro. ls All the standard controls are
available via the respective Apps on your mobile device or other platform (Apple, Google, Alexa, etc.)
devices. If you have connected the IR Receiver and programmed the VAIL Cast IR you can also use an IR
remote to control volume and mute.
You will need to use the front controls when performing certain setup features such as Bluetooth
pairing, IR learning or factory reset so you should make sure you have access to them.
How do I switch between the optical or aux input and streaming?
The VAIL Cast will automatically switch to the last source requested.
There are no lights showing. Is it on?
If you have setup VAIL Cast and it is plugged in it is on. When not in use it will go into standby, and no
lights will show on the front. It will wake up nearly instantly when asked to play something. You can
also place it into standby by holding the mute button down for 3 second s.
Do I need to turn the VAIL Cast on when not using it?
No. The VAIL Cast will enter a standby mode, an intelligent "Off" when not in use and awaken quickly
when asked to play.
How do I update the firmware? Is updated firmware available?
We always seek to make our products the best they can be, and this may occasionally mean firmware
updates. The VAIL Cast comes out of the box ready to receive updates automatically when first
powered up and connected. No action is needed on your part. It will periodically look for update
firmware and install it if available. When updating firmware, the CAST light will blink multiple colors
for the duration of the installation. .
I've programmed my TV remote to control the volume when I have my TV connected to the Optical
Input. Can I use it to control the volume on other sources?
Yes. Once a remote is programmed you can use it to control the volume on all sources playi ng.