Summary of Contents for Vanguard Dynamics VAIL AMP
Page 1
VAIL AMP OWNER’S MANUAL 8 Ohm Power 4 Ohm NOTE: Prior to installation please check to make sure your intended wiring method complies with local regulations...
Page 2
WIRING The VAIL Amp was designed with exibility in mind. The VAIL Amp uses a CAT-5 cable and a 16-2 AWG power cable to connect the VAIL Amp to the Wall Plate. Extend these common wire standards to mount the VAIL Amp and Wall Plate in opposite sides of the room if desired, up to 300ft, or a remote location like...
Page 3
Connect provided 24v power supply to electrical outlet. OPTIONAL VAIL Plug Power Supply (PPS) – When replacing in-wall volume controllers with the VAIL Amp, we recommend the PPS to convert speaker cable from the ampli er into injected power cables.
Page 4
LIMITED FIVE-YEAR WARRANTY LIMITED 5 YEAR WARRANTY Engineered in the USA | 1 (866) 834 6321 | www.VanguardDynamics.com...