Summary Check - Yaesu FTDX-9000 Operation Manual

You may do a band-by band, mode-by mode, or "all log" summary of your log data.
M - S
1. Referring to Figure 2 on page 23, pressing
[ F5 ]( SUMMARY ) to brings up the Summary page,
and you may then press [ F2 ]( MODE-SEL ) and
select the desired mode, using the keyboard's ar-
row keys.
2. When you press [ F5 ]( RUN ) , the summary list for
the selected mode will be displayed.
3. Use the [ F1 ]( ) and [ F2 ]( ) keys to scroll through
the summary list.
O - S
1. Referring to Figure 2 on page 23, press
[ F5 ]( SUMMARY ) to bring up the Summary page,
then press [ F3 ]( OP-SEL ) and then use the
keyboard's arrow keys to select "ALL-OP" or
"CURRENT OP" as desired.
ALL-OP: All log data from all operators reg-
istered on the data stored on the
CF card will be displayed.
CURRENT OP: Only the log data from the cur-
rent operator will be displayed.
2. Press [ F5 ]( RUN ) to display the summary list for
the selected operator, or all operators..
3. Use the [ F1 ]( ) and [ F2 ]( ) keys to scroll through
the summary list.
Note: The Summary Check function requires that
"NORMAL" be selected as the "Log Type" before you
start, and only logs containing the PREFIX may be
used for this function.
FT 9000 TFT O
S
UMMARY
C
C
M
L B
OG OOK
C
HECK
S
F
UNCTION
C M
Page 29