Yaesu FT-60R Operating Manual page 70

S M
ET ENU
R S
Enables/Disables the Automatic Repeater Shift function.
Sets the Repeater Shift Direction.
Sets the magnitude of the repeater Shift.
CTCSS/DSC/DTMF S
Selects the number of CTCSS/DCS Bell ringer repetitions.
Setting of the DCS code.
Enables/Disables "Inverted" DCS code decoding.
Setting of the DTMF Autodialer Delay Time.
Setting of the DTMF Autodialer Sending Speed.
Programming of the DTMF Autodialer.
Enables/Disables split CTCSS/DCS coding.
Selects the Tone Encoder and/or Decoder mode.
Setting of the CTCSS Tone Frequency.
ARTS S
Selects the Beep option during ARTS operation.
Selects the Polling Interval during ARTS operation.
Enables/disables the CW identifier during ARTS operation.
Programs and activates the CW Identifier (used during ARTS
operation).
M S
Toggles the display indication between "frequency" and the
channel's "Alpha/Numeric Tag."
Stores Alpha-Numeric "Tags" for the Memory channels.
S S
Selects the Scan Resume mode.
Enables/disables the Priority Revert feature.
Selects the Memory Scan channel-selection mode.
Enables/Disables the Scan lamp while paused.
Selects the Memory Scan "Skip" channel-selection mode.
Enables/Disables the Weather Alert Scan feature.
P S S
Selects the Receive-mode Battery Saver interval ("sleep"
ratio).
Enables/Disables the Transmitter Battery Saver.
WIRES™ S
Selects the Internet Link Connection mode.
Selects the Access Number (DTMF digit) for WIRES™ op-
eration.
Selects the memory register for an Access Number (DTMF
digit) for non-WIRES™.
Enables/disables the Enhanced CTCSS Paging & Code
Squelch function.
Enables/disables the Answer Back function of the Enhanced
CTCSS Paging & Code Squelch.
Setting the Receiver Pager Code for the Enhanced CTCSS
Paging & Code Squelch.
Setting the Transmitting Pager Code for the Enhanced
CTCSS Paging & Code Squelch.
: Depends on the transceiver version.
68
M
ODE
S M I A
4 [ ARS ]
ARS. ON / ARS.OFF
38 [ RPT.MOD ] RPT.OFF / RPT. – / RPT. + ( )
45 [ SHIFT ]
0.00 - 99.95 MHz ( )
S M I A
7 [ BELL ]
OFF / 1T / 3T / 5T / 8T / CONT
13 [ DCS.COD ] 104 standard DCS codes ( 023 )
14 [ DCS.N/R ]
T/RX N, RX R, TX R, T/RX R
15 [ DT DLY ]
50MS / 100MS / 250MS / 450MS /
750MS / 1000MS
16 [ DT SPD ]
50MS /100MS
17 [ DT WRT ] –
47 [ SPLIT ]
SPL.OFF / SPL. ON
48 [ SQL.TYP ]
OFF / TONE / TSQL /
REV TN / DCS
50 [ TN FRQ ]
50 standard CTCSS tones ( 100 Hz )
S M I A
2 [ AR BEP ]
INRANG / ALWAYS / OFF
3 [ AR INT ]
25 SEC / 15 SEC
10 [ CWID ]
TX OFF / TX ON
11 [ CW WRT ] –
S M I A
27 [ NAME ]
FREQ / ALPHA
28 [ NM WRT ] –
S M I A
35 [ RESUME ]
BUSY / HOLD / TIME
39 [ PRI.RVT ]
RVT.OFF / RVT. ON
43 [ SCN MD ]
ONLY / MEM
44 [ SCN.LMP ]
ON / OFF
46 [ SKIP ]
OFF / SKIP / ONLY
56 [ WX ALT ]
ALT.OFF / ALT. ON
S M I A
41 [ RXSAVE ]
200 MS / 300 MS / 500 MS /
1 S / 2 S / OFF
53 [ TXSAVE ]
SAV.OFF / SAV. ON
S M I A
21 [ I NET ]
INT.OFF / INT.COD / INT.MEM
22 [ INT CD ]
CODE 0 - CODE 9 ( CODE 1 )
23 [ INT MR ]
d1 - d9
29 [ PAGER ]
OFF / ON
30 [ PAG.ABK ]
ABK.OFF / ABK. ON
31 [ PAG.CDR ] –
32 [ PAG.CDT ] –
FT-60R O
( )
V
( )
V
( )
V
( )
V
( )
V
( )
V
( )
V
M