Table of Contents
Advertisement
Attention: The M.2 solid-state drive is sensitive. Inappropriate handling might cause damage and
permanent loss of data. When handling the M.2 solid-state drive, observe the following guidelines:
• Replace the M.2 solid-state drive only for upgrade or repair. The M.2 solid-state drive is not designed for
frequent changes or replacement.
• Do not touch the contact edge of the M.2 solid-state drive. Otherwise, the M.2 solid-state drive might get
damaged.
• Do not apply pressure to the M.2 solid-state drive.
• Do not make the M.2 solid-state drive subject to physical shocks or vibration. Put the M.2 solid-state drive
on a soft material, such as cloth, to absorb physical shocks.
For access, remove the following parts in order:
• "Computer cover" on page 14
• "Front bezel" on page 15
• "Optical drive" on page 17
• "Storage drive" on page 19
Removal steps
Note: If the card is held in place by retaining latch, press the latch as shown to disengage the latch. Then,
gently remove the card from the slot.
22
IdeaCentre 3 User Guide
Advertisement
Table of Contents
