Csx2000 Color Server; Version 2.0; Key Operator Profile; Non-Standard Paper Size Support - Xerox CSX 2000 Reference Manual

X E R O X D O C U C O L O R 2 0 0 0 S E R I E S
C U S T O M E R E X P E C T A T I O N S D O C U M E N T
2

CSX2000 Color Server

Version 2.0

The purpose of this document is to provide additional information about the capabilities
and potential limitations of the CSX2000 version 2.0 when connected to a DocuColor
2045 or DocuColor 2060. It is recommended that Version 2.0 be installed with the IOT
system version 3.0 to take full advantage of new / enhanced engine features.

Key Operator Profile

To optimize the performance of DocuColor 2000 CSX Color Server, it is recommended
that, at a minimum, the operators be skilled in the following areas:
Hardware
PCs Job submission
Macintosh Trapping
Network Environments Imposition
PDF workflow
Calibration
Color management
Color correction

Non-standard Paper Size Support

The DocuColor 2045CSX and 2060CSX system supports non-standard paper sizes.
However, due to rounding and unit-conversions that occur in the client applications, RIP
server, and printer, some mismatch may occur between the paper size entered at the
application, and the paper size that must be entered at the printer. The operator may
need to adjust the entered paper dimensions by up to 2.5 mm (0.1 in) in order for the
printer to detect that the requested paper size has been loaded.
In addition, the printer interprets some paper sizes included in the PPD as non-standard
sizes.
Pre-Press Color Publishing Software
Corel Draw 8.0 or higher
Adobe PageMaker 6.5 or higher
MS Office Suite 98
Adobe Acrobat 4.0 or higher
Macromedia FreeHand 8.0 or
higher
Adobe PhotoShop 5.0 or higher
Quark Xpress 4.0 or higher
V e r s i o n 2 . 0
2
March 28, 2002