Page 1
USER MANUAL ENGLISH VT 401 – HDMI to 3G SDI Converter Product code: 101271 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
Page 2
VT 401 – HDMI to 3G SDI Converter Preface Thank you for purchasing this DMT product. The purpose of this user manual is to provide instructions for the correct and safe use of this product. Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
VT 401 – HDMI to 3G SDI Converter Table of contents Introduction ................................3 Before Using the Product ..........................3 Intended Use ............................... 3 Product Lifespan ..............................3 Text Conventions ..............................3 Symbols and Signal Words ..........................4 Symbols on the Information Label ........................4 Safety ..................................
VT 401 – HDMI to 3G SDI Converter Introduction Before Using the Product Important Read and follow the instructions in this user manual before installing, operating or servicing this product. The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual.
VT 401 – HDMI to 3G SDI Converter Symbols and Signal Words Safety notes and warnings are indicated throughout the user manual by safety signs. Always follow the instructions provided in this user manual. Indicates an imminently hazardous situation which, if not avoided, will result in DANGER death or serious injury.
VT 401 – HDMI to 3G SDI Converter Safety Important Read and follow the instructions in this user manual before installing, operating or servicing this product. The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual.
VT 401 – HDMI to 3G SDI Converter Attention This device shall be used only for the purposes it is designed for. This device is designed to be used as an HDMI to 3G SDI converter. Any incorrect use may lead to hazardous situations and result in injuries and material damage.
VT 401 – HDMI to 3G SDI Converter Description of the Device The VT 401 is a compact HDMI to 3G SDI signal converter. The VT 401 is powered with a micro USB connector. You can use the 2 supplied mounting brackets to mount the device.
VT 401 – HDMI to 3G SDI Converter Product Specifications Model: VT 401- HDMI to 3G SDI Converter Electrical: Input voltage: 5 V DC (via USB) Power consumption: Impedance: 75 Ω Physical: Dimensions: 97 x 74 x 23 mm (LxWxH)
VT 401 – HDMI to 3G SDI Converter Setup and Operation Warnings and Precautions Attention Connect all data cables before supplying power. Disconnect power supply before connecting or disconnecting data cables. Installation Site Requirements The device must be installed only indoors.
VT 401 – HDMI to 3G SDI Converter To connect the device to other devices, follow the steps below: Insert 2 screws into the 2 x mounting brackets (06) and tighten them, to mount the device on a display or a monitor. See Fig. 07.
VT 401 – HDMI to 3G SDI Converter 4.5. LED Statuses There are 2 LED indicators: lock LED indicator (Green) (02) and power LED indicator (Red) (03). The LED indicators have the following functions: ● LOCK: If the light is on, the device is receiving a correct HDMI signal.
VT 401 – HDMI to 3G SDI Converter Attention ● Do not immerse the device in liquid. ● Do not use alcohol or solvents. ● Make sure that the connections are fully dry before connecting the device to the power supply and to other devices.
Need help?
Do you have a question about the VT 401 and is the answer not in the manual?
Questions and answers