Table of Contents
Advertisement
To prevent the build-up of high levels of
nitrogen (1 to 2 psig, 6.9 to 13.8 kPa)
through the refrigerant piping during
and the introduction of moisture into the
system.
charge from only the high side may result in
suction tubing. Application of a brazing
torch to a pressurized system may result in
ignition of the refrigerant and oil mixture.
applying heat.
hazardous to your health.
Avoid breathing vapors or fumes from brazing
areas.
Wear gloves and protective goggles or face shield to
protect against burns.
Recommended line length is 50' or less. If more than 50'
line set is required, contact GE Appliances.
507789-02G / 31-5000673-1
WARNING
WARNING
CAUTION
NOTE
Sealing the Unit
installed in an unconditioned area.
If installed in an unconditioned space, sealant should be
sealing strips, caulking, or equivalent sealing method
any gaps or holes in the cabinet.
Issue 2336
WARNING
IMPORTANT
Page 11 of 24
Advertisement
Table of Contents
