pro.cooker 498052 Instructions Manual page 12

EN
1. Spécifications
2. Measurements
2.1 The effects of additives
2.2 Contrast with labotary methods
2.3 Measuring
2.4 Start measuring
2.5 Please follow the points bellow to get the most accurate results
3. Configuration mode
4. Configuration options
5. Set the High and Low alarm
5.1 Set the TPM alarm cap
5.2 Set the TPM alarm limit
6. User Calibration
7. Restore factory settings
WARNING!
If the instrument is overheated, it may cause a risk of burns (probe and
probe rad
• Do not touch the hot parts on the instrument.
• Allow the instrument to cool before cleaning.
• If you are burned, immediately rinse the wound with cold water, if
necessary, consult a doctor.
• Use a clean cleaner, standard water or soapy water.
• Clean the probe gently with a soft paper towel or rinse it in water.
• Wipe dry the probe with a soft paper towel
12
Contents
p.14
p.15
p.15
p.15
p.16
p.16
p.16
p.17
p.18
p.18
p.18
p.18
p.19
p.19