Warning On Power Connection; Unleaded Solder - Sony SS-SP50FW Service Manual

1-7. Warning on Power Connection

Use a proper power cord for your local power supply.
The United States,
Canada
Plug type VM0233
Female end VM0089
Cord type STV
Rated Voltage & Current 10 A/125 V
Safety approval UL/CSA
1) Use an appropriate rating plug which is applied to local regulations.

1-8. Unleaded Solder

Boards requiring use of unleaded solder are printed with a lead free mark (LF) indicating the solder
contains no lead.
(Caution: Some printed circuit boards may not come printed with the lead free mark due to their
particular size.)
LEAD FREE MARK
Pb
m
. Be sure to use the unleaded solder for the printed circuit board printed with the lead free mark.
. The unleaded solder melts at a temperature about 40 dC higher than the ordinary solder, therefore, it is
recommended to use the soldering iron having a temperature regulator.
. The ordinary soldering iron can be used but the iron tip has to be applied to the solder joint for a
slightly longer time. The printed pattern (copper foil) may peel away if the heated tip is applied for too
long, so be careful.
1-16
Continental Europe UK, Ireland, Australia,
New Zealand
1)
COX-07/636 –
COX-02/VM0310B VM0303B
H05VV-F CEE (13) 53rd (O, C)
10 A/250 V 10 A/250 V
VDE VDE
Japan
VM1296
VM1313
HVCTF
10A/125V
DENAN-HO
FWD-50PX2