Transporting The Boiler On Rollers - Bosch Condens 7000 FP Installation And Service Instructions Manual

Transporting the boiler
5.
6. 6. 6.
Fig. 14 Place the trolley jack underneath, push in the transport rollers
(example for illustration purposes)
[1] Trolley jack
[2] Pallet (2x)
[3] Transport rollers (2x)
1 2
Fig. 15 Boiler on the transport rollers (example for illustration
purposes)
[1] Transport rollers
[2] Transport timber
16
4. 4. 4.
1.
3.
2.
3
0010036081-001
1
0010036082-001
2. 2. 2.
1
2
Fig. 16 Remove the transport rollers, mount the adjustable feet
(example for illustration purposes)
[1] Transport rollers
[2] Adjustable feet (4x)
Fig. 17 Remove the transport timbers (example for illustration
purposes)
4.4

Transporting the boiler on rollers

If the route to the boiler room is level, the boiler can also be rolled.
▶ Use at least 5 pipe sections of approx. 700 mm length (Diameter
R 1¼ ") as rollers.
▶ Position the pipes approx. 400 mm apart on the floor.
▶ Lift the floor standing boiler onto the lengths of pipe and carefully roll
it to the boiler room.
Commercially-available transport rollers can be used.
2. 2. 2.
3. 3. 3.
4. 4. 4.
1
2. 2. 2.
2
Condens 7000 FP – 6721846699 (2022/12)
2. 2. 2.
1.
0010036084-001
0010036083-001