Connecting external players ....12 Connecting a TV ......12 Technical data ........28 Connecting sat receivers, Blu-ray players, game consoles ..13 Connecting a PC ......14 Connecting the stereo system ..14 Pairing Bluetooth® devices ... 14 Mains connection ......16 • CONCEPT 8...
Please refer to the proof of purchase (enclosed with the loudspeaker), Online support: or the order confirmation that you www.teufelaudio.com/service received as a PDF document. www.teufel.de/service 2. Serial number ► Refer to the rear of the loudspeaker. Contact form: Germany: www.teufel.de/kontakt International: www.teufelaudio.com/contact • CONCEPT 8...
Read the user manual and safety booklet carefully. ► Keep the instructions in a safe place so that they can be passed on to third parties. ► When passing on the loudspeaker, also pass on the instructions. • CONCEPT 8 5...
Do not touch the membrane in the bottom of the loudspeaker when doing so. Checking the scope of supply Scope of supply (1) CONCEPT 8 (2) Remote control including batteries* (2× LR03 AAA, 1.5 V) (3) Mains cable (C7 / European standard plug) (4) Loudspeaker cable (copper), 2×...
(22) NOTE LEDs (5)–(13) have various display functions e.g. standby mode, active external player and many others. The chapters on the corresponding loudspeaker functions explain the meanings of the different displays in the respective operating situations. • CONCEPT 8 7...
(26) SPEAKER OUT → Connecting satellite loudspeakers – p. 11 (27) HDMI IN → Connecting sat receivers, Blu-ray players, game consoles – p. 13 (28) HDMI TV → Connecting a TV – p. 12 (29) USB → Connecting a PC – p. 14 (30) OPTICAL IN → Connecting a TV – p. 12 (31) AUX IN LEFT/RIGHT → Connecting the stereo system – p. 14 / (32) 5.1 IN CENTER/SUB → Connecting a TV – p. 12 (33) 5.1 IN REAR L/R • CONCEPT 8...
Start tone control mode. (51) → p . 2 4 Sound modes Change the settable frequency range with (41) Set the required sound mode. Bass MOVIE GAME Treble VOICE+ NIGHT MUSIC Overview of remote control functions • CONCEPT 8 9...
■ Dry, dust-free environment. in the PC workplace, i.e. the area where ■ Avoid proximity to heat sources and the screen and listener are located. direct sunlight. ► Position the loudspeakers within the grey areas. • CONCEPT 8...
1. Lay the loudspeaker cable from the subwoofer to each satellite loudspeaker. ► 2 satellite loudspeakers for 2.1 Connecting the loudspeakers configuration; 5 satellite loudspeakers for 5.1 configuration. • CONCEPT 8 11...
(2× Front, 2× Rear, 1× Center) + 1× subwoofer. ☑ Illustration of HDMI TV connection The configuration has been set. ■ With the CEC (Consumer Electronics Control) HDMI function, control commands are exchanged between connected devices, i.e. you can • CONCEPT 8...
(PC) to "Full- Stereo mini-jack cable (Rear L/R), spectrum loudspeaker" and "Large", Stereo mini-jack cable (Center). since CONCEPT 8 is provided with ■ Correctly set the configuration of the integrated bass management. external player (channel layout, bass management, etc.).
Page 15
☑ external player. Bluetooth® list is deleted. ► Follow the user manual of the external player. 5. Select the “TEUFEL CONCEPT 8“ loudspeaker in the list of Bluetooth® devices. The LED (6) lights up white. LED display Meaning Bluetooth® device connected ☑...
1. Connect the mains cable (3) to the loudspeaker’s power connector (52). 2. Connect the mains cable (3) to a mains socket. The LED (9) lights up red. LED display Meaning Standby ☑ The loudspeaker is connected and in standby mode. • CONCEPT 8...
Player (source) deactivated (OFF). Bluetooth® ► Press the AUTO ON button(25) on the HDMI back of the loudspeaker to change the setting. ☑ The "Auto-On" function has been activated / deactivated. ☑ The loudspeaker is switched on. • CONCEPT 8 17...
TV, HDMI and OPT external players is indicated via colour. LED display Sound format Dolby Audio not possible (e.g. DTS) NOTE If the associated LED flashes orange (playback not possible), change the playback format to Dolby Audio or PCM. • CONCEPT 8...
(faster), press and hold Playing the next track the touch button / button. ► Press button (41) on the remote ☑ The volume is increased. control. ☑ LED display Meaning The next track is started. Increase volume • CONCEPT 8 19...
LED display will go out after a few volume in steps or gradually, you can seconds if there is no interaction with the button (22) / (39) on the also use the loudspeaker (e.g. a button press). operating panel or the remote control. • CONCEPT 8...
When the Upmix function is activated, stereo contents (2 channels) are played Dynamore® is a technology developed by in surround sound (5.1): The CONCEPT 8 Teufel that virtually expands the stereo calculates the signals required for the addi- panorama to create an impressive, wide- tional loudspeakers (Rear L/R, Center) and ranging sound.
(Bass / Mid / Treble); the current selection flashes. LED display Frequency range Bass Treble ☑ Tone control mode has been activated and can be set. 2. Use the / buttons (41) to select the required frequency range (Bass / Mid / Treble). • CONCEPT 8...
Left Front (2.1 / 5.1) Center (5.1) Right Front (2.1 / 5.1) Right Rear (5.1) Left Rear (5.1) Subwoofer (2.1) ☑ Channel level mode has been activated and the volume can be set for the selected channel. • CONCEPT 8 23...
NIGHT: Reduced bass sounds and the settings. dynamic. The illuminated LED "DEEP" or "LOUD" • MUSIC: Slight bass and treble emphasis indicates the activated setting. (slight loudness adjustment); for ☑ DEEP" or "LOUD" bass performance playing back music. has been set. • CONCEPT 8...
Replacing the batteries (remote control) 1. Slide the battery compartment open towards the bottom. 2. Remove the old batteries and insert new batteries of the same type. 3. Close the battery compartment. ☑ The batteries have been replaced. • CONCEPT 8 25...
“PCM” if there are problems playing back with Dolby Digital bitstream. External device ► Make sure that CONCEPT 8 is (TV) has not been connected to the TV’s ARC (Audio connected properly. Return Channel) connection and that ARC has been activated in the TV settings.
► Press and hold the RESET button (34) on the back of the loudspeaker until the rear LEDs flash. ☑ The loudspeaker has been reset to the factory settings. All personal settings have been deleted. • CONCEPT 8 27...
Bluetooth® 2400–2483.5 MHz 9.5 mW / 9.8 dBm Lautsprecher Teufel GmbH hereby declares that the subwoofer CONCEPT 8 complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: www.teufel.de/konformitaetserklaerungen www.teufelaudio.com/declaration-of-conformity...
Page 30
10787 Berlin (Germany) www.teufelaudio.com/service www.teufel.de/service www.teufelaudio.com www.teufel.de Contact form: www.teufel.ch www.teufel.de/kontakt www.teufelaudio.at Contact: www.teufelaudio.nl www.teufelaudio.com/contact www.teufelaudio.be www.teufelaudio.fr All information is provided without www.teufelaudio.pl guarantee. www.teufelaudio.it Subject to technical changes. www.teufelaudio.es Typographical and other errors excepted. Teufel CONCEPT 8 UM EN V1.1 PD...
Need help?
Do you have a question about the CONCEPT 8 and is the answer not in the manual?
Questions and answers