Advertisement
Available languages
Available languages
Programming the Schedule
The Rondostat has built-in programs which can be configured in the parameter settings (refer to the Parameters Guide for details). The Rondostat will operate
according to the selected built-in program, or you can make adjustments to suit your own weekly or daily schedule.
Program 0 (default)
MON-SUN
HR10
HIGH
HIGH and LOW
temperature
LOW
points only.
MON-SUN
HR27
HIGH
HR35
MED
HIGH, MEDIUM
LOW
and LOW
temperature
points.
Press
to enter the settings menu.
1
SET TEMPS should be displayed.
set temps
Press
or
to scroll through the
3
different schedule editing options.
m o n - s u n
The following example will show editing
4
sequence 3 above: MON-FRI then SAT-SUN.
mon-fri
(When in AUTOMOTIC mode these are the set times the Rondostat will open or close the radiator valve during the week)
HIGH
LOW
HIGH
LOW
HIGH
MED
LOW
HIGH
MED
LOW
Press
to scroll to the program menu.
2
program
The schedule can be edited in either blocks of days, or as individual days. It's best to choose one of the three editing
sequences below - as changes made using another sequence will overwrite any previous changes.
1
mon-sun
monday
Edit all 7 days of the
week together with the
same daily schedule.
Press
to select the start time of the first ON
5
period. 0600-2200 should flash.
0600-2200
Program 1
MON-FRI
SAT-SUN
MON-FRI
HIGH
MED
LOW
SAT-SUN
HIGH
MED
LOW
Press
3
1-7 MON-SUN should be displayed.
2
Sunday
Edit each day of the week to have
their own individual daily schedule.
Press
6
Press
Program 2
MON-FRI
SAT-SUN
to enter the PROGRAM menu.
mon-sun
3
mon-fri
sat-sun
Edit all weekdays
Edit both weekend
together with the
days together with the
same daily schedule.
same daily schedule.
or
to adjust the start time.
when done.
0700-2200
0700
Continued
Advertisement
