Toro Greensmaster eFlex 1021 Operator's Manual page 20

InfoCenter LCD Display (continued)
InfoCenter Menu Items (continued)
Service Menu
Menu Item
Hours
Mow Time
Power Use
Battery
Charge
Battery
Current
Battery
Volts
Total Usage Lists the total amount of battery usage in amp hours.
Capacity
Charge
Cycles
Battery
Hours
Backlap
Energy
Diagnostics Menu
Menu Item
Key On
Traction
Throttle
Bail
Target rpm
Motor rpm
12V Supply
5V Supply
CAN Bus
Product Overview: Controls
Description
Lists the total number of hours that the machine has been turned on.
Lists the total number of hours that the reel has been turned on.
Lists the instantaneous power delivered by the battery in Watts.
Lists the current battery charge as a percent of capacity.
Lists the instantaneous current delivered by the battery in Amps.
Lists the battery potential in volts.
List the current battery capacity in amp hours.
Lists the total amount of battery charge cycles. A charge cycle is defined by the
process of connecting and disconnecting the charger.
Lists the total amount of hours that the battery has been active.
Sets the machine in Backlap Mode.
Lists the total energy delivered by the battery over its entire life in watt-hours.
Description
Indicates whether the ignition key is on or off.
Indicates whether the traction is engaged or disengaged.
Indicates the throttle control setting in Volts (used to calculate the target rpm).
Indicates the bail control settings in volts.
Lists the desired motor rpm as indicated by the speed control setting.
Lists the actual motor rpm.
Lists the sensor supply voltage #1 of the controller.
Lists the sensor supply voltage #2 of the controller.
Lists the machine communication bus status.
Page 4–7 3460-892 A