Advertisement
Symptoms
No power/function
No video
No audio
Disto ted video or rolling picture
Unable to play
Remote Control does not work
Suppo t
If you require fu ther assistance with your new DVD player, please contact our
suppo t team on the Oakcastle website:
Troubleshooting
Solutions
Check that the power is switched on at the wall.
Check that the power adaptor is properly connected
to power outlet.
Make sure that the video cables are connected
rectly.
Check that the input setting on t
Press the VIDEO button repeat
picture appears on TV.
Re-install the connection cables.
Reset the settings of the DVD player.
Make sure that the audio cables are connected
rectly.
Make sure that the coaxial connected stereo is
powered on.
Re-install the connection cables.
Reset the settings of the DVD player.
Clean DVD disc of dust/di t
The playback is on rewind/fast fo ward mode.
Press the P/N button repeatedly to set the color
encoding to t
rect system to match the con-
nected TV.
Place a DVD disc in the disc tray.
Place the disc in with the label side up.
Clean DVD disc of dust/di t.
Close the setup of the DVD player.
Check that the disc or file is compatible with the unit.
Aim the Remote Control towards the sensor on the
front panel of the DVD player.
Use the Remote Control closer to the DVD player.
Check the batte y level of the batt
if necessa y.
www.oakcastle.co.uk
EN
rect.
rect
replace
15
Advertisement
