Advertisement
Setting Up
Connect the DVD player power adapter to a wall outlet. Press the power button
(
/
) on the unit or remote control t
on the front panel will illuminate.
Follow one of the steps below for connecting your DVD player:
Connecting Via RCA Cable
Connect an RCA cable between the 2 channel Audio Output po t and the RCA
input on your TV.
Connecting via HDMI
Connect a HDMI cable between the HDMI Output on the back panel of the DVD
player (
) to the HDMI input on your TV.
(
Programme Button
If the disc has two or more tracks, chapters, or titles, if desired, you can set up
playing order preference to be in a different order to the default order. Press the
PROG button (
(
) to input the number of the track, title or chapter. To enter a double digit
followed by the second digit of your preference. Use the up/do
(
/
/
position you wish to program. After programming, navigate to the 'PLAY' button on
the screen, then press ENTER button (
to the CLEAR button on the screen, then press ENTER button (
settings.
To exit Program mode, press the PROG button (
) to open up Program mode, then use the number buttons
/
) to move the cursor to the next track, chapter or title
Getting Sta ted
your DVD player, the display
) to sta t program playing. Navigate
) again.
EN
keys
) to clear all
7
Advertisement
