Raddy RF206 User Manual page 5

10: Scheduled Power-On Time Setting:
10.1: Setting the Scheduled Power-On Time: In clock display mode, long press [
for 2 seconds. The LCD screen will display the scheduled power-on hour with "**"
and "AL" characters flashing. Light press or long press [ ▲ , ▼ ] to adjust the
scheduled power-on hour time upwards or downwards. Then, light press [
move to the scheduled power-on minute time, which will also flash with "**" and
"AL". Light press or long press [ ▲ , ▼ ] to adjust the scheduled power-on minute
time upwards or downwards. Light press [
the device will automatically confirm the adjusted scheduled power-on time within
10 seconds.
10.2: Disabling the Scheduled Power-On Function: In clock display mode, when the
LCD screen displays the "AL" character, light press [
power-on function, and the "AL" character will disappear from the LCD screen.
11: Setting the Sleep Auto Shutdown Time:
While the device is powered on or in a scheduled power-on state, long press [
for 2 seconds to activate the sleep timer setting. The LCD will display "
and the "
sleep timer duration from options such as 120-110-100-90-80-70-60-50-40-30-20-
10-OFF (in minutes). If there is no further input within 3 seconds, the LCD will
return to the playback mode, and the blinking
mode, the device will automatically power off within the selected sleep timer
duration.
12: Locking and Unlocking Function
Long press [
indicating that the device is locked.
Long press [
indicating that the device is unlocked.
Note: The [
lock, while other buttons are locked. To unlock, follow the steps above.
13: Adjusting the Radio Backlight Brightness:
Light press [
options: low brightness, high brightness, or turning off the backlight.
14: Using the Antenna:
When listening to FM and SW, extend the antenna and adjust its length and direction
to find the best reception.
*Tip: If you experience strong interference from a radio station causing channel
overlap, you can mitigate it by adjusting the telescopic antenna to a shorter length.
For AM broadcasts, this device utilizes a built-in magnetic antenna to receive
medium wave signals. Magnetic antennas have some directionality when receiving
signals. Therefore, when listening to medium wave broadcasts, try rotating the
device to find the optimal reception position.
External antenna:Improve FM/SW band receiving effect [
Using the 3.5MM jack of external antenna into this antenna jack
Suitable for use in poor signal situations.
*Tip:the external antenna is not the standard accessory.
" symbol will blink to indicate this. light press [▲ ▼] to choose the
] for 2 seconds, and the LCD screen will display the "
for 2 seconds once more, and the "
]Volume Knob, OFF/ON Toggle Switch] are not affected by the
] to adjust the backlight brightness. You can choose from three
] to confirm. If you stop the operation,
] to disable the scheduled
"
4
" symbol will cease. In this
" symbol will disappear,
].
]
] to
]
120,"
" symbol,