EOS Econ D2 Quick Start Manual

Operation

Start time preselection (timer)

MODE
Press button - „temperature" line becomes highlighted.
Use to select the „Start time" function.
MODE
Press button again - start time value starts to flash.
MODE
Use / to set the hour, press briefly, then set minutes using
MODE
/ , then press for 3 seconds, to confirm setting.
To activate the timer press briefly the button. The symbol
appear in the top line on the screen and the start time will start to flash.
To disable the timer press again the button - the symbol
disappear.
To activate the timer in recurring switching mode, press
until the symbol starts flashing.
Note: You cannot start your sauna if the start time has been programmed.
Set the start time back to „--:--", to return to default manual switching.

Child lock (keypad lock)

Press the buttons and for 3 seconds. The unit will be locked, the
symbol will appear on screen. Press these buttons again for 3 seconds,
to unlock the unit. The symbol will disappear.

Repeat setup

MODE
To repeat the setup, press the buttons and
repeat the basic setup, like setting the language, time, Life-Guard, etc.
Note: This function is not accessible by active keypad lock or holiday home
mode (limited access mode). Unlock the unit to access the setup.
Overview
main power
switch
LCD display
will
will
> 5 seconds -
Important notice
The present quick-stand guide does not intend to re-
place the complete operation manual. Please make
sure to read the complete installation and operation
manual before using the control unit.
. Now you can
EOS Saunatechnik GmbH
Schneiderstriesch 1
35759 Driedorf, Germany
Tel. +49 2775 82-0
info@eos-sauna.de
www.eos-sauna.de
©2018 EOS Saunatechnik GmbH, all rights reserved.
Heating on / off
Light on / off
Next function / increase value
Next function / reduce value
Program mode / confirm
MODE
Econ D2
Quick-start guide