Table of Contents
Advertisement
EN
6.7 Adding detergent
1. Slide out the detergent drawer.
2. Put the required chemicals into corresponding
compartments (Fig. 6-4)
3. Push back the drawer gently.
Note:
Remove detergent residues before next wash cycle from the detergent drawer.
Do not overuse detergent or softener.
Please follow the instruction on the detergent package.
Always fi ll the detergent just before the beginning of the wash cycle.
Concentrated liquid detergent should be diluted before adding.
Do not use liquid detergent if "Delay" is selected.
Carefully choose the programme settings according to the care symbols on all laun-
dry labels and according to the programme table.
6.8 Switch on the appliance
Touch the "Power"- button to switch on the appli-
ance (Fig. 6-5). The LED of the "Start/Pause" button
is fl ashing.
6.9 Select a programme
To get the best washing results, select a programme
which fi ts the degree of soiling and sort of laundry
type.
Turn the programme knob (Fig. 6-6) to select the
right programme. Related programme LED lights up
and the default settings are displayed.
Note: Odor removal
Before fi rst use we recommended to run programme "Cotton + 90° + 600rpm" with no
load and small amount of detergent in washing agent compartment or special machine
cleaner to remove possibly corruptive residues.
6.10 Add individual selections
Select required options and settings (Fig. 6-7); refer to
CONTROL PANEL.
6-Daily use
6-4
Smart
Mix
Synthetic
Quick 15'
Remote
Cotton
Allergy Care
Wool
Steam
6-5
6-6
Refresh
Cotton 20°C
Spin
Eco 40-60
6-7
17
Advertisement
Table of Contents
