System Dependencies And Prerequisites; Configuration Guide; Productivity Guide - Xerox DocuTech 6100 Planning Manual

Xerox Document Stacker 5000 (DS5000)

System Dependencies and Prerequisites

Configuration Guide

Printer Configurations
SFM IOT
SFM SFM
SFM IOT
SFM SFM

Productivity Guide

Listed below are the dependencies and prerequisites for
installing the DS5000 in-line with the Nuvera Digital Production
System.
•
The Finisher Transport Module is required for in-line
connectivity to the printer.
•
Currently, a Xerox Document Stacker 5000 must be installed
in-line with the printer if another in-line device is a part of the
solution.
Note: In case the floor at the customer site is very uneven, it is
recommended that the Nuvera IOT is installed and leveled with a
Caster Leveling Kit (kit number 498K07900).
The Configuration Guide contains diagrams over the various
Finishing Solutions that are available.
Finisher Configurations
FTM DS5000
DS5000
IOT FTM
DS5000
INS FTM
DS5000
IOT INS FTM
DS5000
DS5000
DS5000
DS5000
The DS5000 does not affect the base printers output speed.
DS5000 DS5000
DB120D DS5000 DS5000
FP II DS5000 DS5000
SQFBM DS5000 DS5000
BDFX DS5000 BCFX
BDFX SQEDG
DS5000 BDFX DS5000
DS5000 BCFX BDFX SQEDG
3-2
DB120D
FP II
SQFBM
BDFX DS5000 BCFX BDFX
DS5000 BCFX BDFX
DS5000 DS5000 BDFX
SQEDG
SQEDG