Xerox DocuPrint C11 User Manual page 49

Table 3.5 Indicator light states (continued)
Status of light
Flashing rapidly
Condition/Corrective Action
Check for the following conditions and perform the appropriate corrective action:
• If the printer is out of paper, load paper and press the
• If paper is jammed, clear the jam and press the
• If a print cartridge is installed in the incorrect carriage or not installed,
replace or reposition the cartridge. The printer will then initialize and the
Indicator Light will remain lit.
If none of these actions resolve the problem,
disconnect it from the electrical power supply.
• Make sure that the print cartridge carriage and feeder paths are not
obstructed.
• Then reconnect and Power On
If the Indicator Light continues to flash rapidly, disconnect the printer and contact
the Xerox Customer Support Center.
RESUME
RESUME button.
Power Off the printer and
the printer.
Table 3.5 Page 2 of 2
Chapter 3: Printing
Printer Buttons
button.
3-11