Table of Contents
Advertisement
6. Choose the product you want to pair with (mouse or keyboard). Confirm that the
receiver is detected by the Device Pairing Tool as shown in the screenshot, then
continue and follow the on-screen instructions.
7. If this doesn't work, please unplug and replug in your receiver to try the steps above
again.
If you see the message "Updating LIGHTSPEED Receiver. Please keep it plugged in" go to:
LIGHTSPEED receiver is stuck updating its
● Using the Device Pairing Tool in G HUB
The Device Pairing Tool in Logitech G HUB allows you to pair replacement USB receivers with
your mouse or keyboard. The Device Pairing Tool also allows you to connect two LIGHTSPEED
devices to one LIGHTSPEED keyboard receiver using the Device Pairing Tool. You may also use
this tool to pair your mouse with Logitech POWERPLAY.
The Device Pairing Tool will allow you to select the receiver and the device you want to pair it
with. The receiver selected will determine what devices can be paired with it. The compatible
devices that can be paired with the selected receiver will be shown afterward.
You may need to update the firmware on your device before using the Device Pairing Tool.
Please follow any on-screen instructions you receive if G HUB informs you that your device
firmware is out-of-date.
firmware.
G915 LIGHTSPEED FAQs
21
My
Advertisement
Table of Contents
