Table of Contents
Advertisement
Safety features of your vehicle
3 Point rear centre belt
(if equipped)
To fasten the rear centre belt
1. Extract the tongue plates from the
holes on the belt assembly cover and
slowly pull the tongue plates out from
the retractor.
CAUTION
- Cargo
Be sure that the cargo is securely
loaded in the rear cargo area. Not
doing so may damage the rear cen-
tre safety belt in sudden stop or
certain collisions.
3
20
OYN039018
2. Insert the tongue plate (A) into the
open end of the anchor connector (C)
until an audible "click" is heard, indi-
cating the latch is locked. Make sure
the belt is not twisted.
D
A
C
1LDN3208A/H
3. Pull the tongue plate (B) and insert the
tongue plate (B) into the open end of
the buckle (D) until an audible "click" is
heard, indicating the latch is locked.
Make sure the belt is not twisted.
B
1LDN3209/H
Advertisement
Table of Contents
