Advertisement
FRONT FOG LIGHT
FRONT FOG
LIGHT
HOW TO USE THE FOG LIGHT
1. Turn the ignition switch to ON.
2. Select the FOG of pop-up information using the
Fn switch.
3. Push forward or pull backward the Fn lever to
select the "ON" of the FOG.
FOG LIGHT INDICATOR
• Comes on when the "ON" of FOG.
FOG LIGHT INDICATOR
CRF1100A/A2/A4/D/D2/D4
Genuine Accessory User's Guide
FRONT SIDE PIPE
<CRF1100A/D>
FRONT
SIDE PIPE
<CRF1100A2/A4/D2/D4>
FRONT
SIDE PIPE
GRIP HEATER
GRIP HEATER
• Do not attempt to move the motorcycle with
holding front side pipe and also to apply extra
pressure on them. It may damage the motorcycle
and front side pipe.
• When this accessory becomes dirty, rinse it
thoroughly with cool water to remove loose dirt,
then wipe with a clean cloth or sponge.
Do not use a brush to clean this accessory as it
may scratch the surface.
• Never use organic solvents such as gasoline,
thinner and benzine to clean this accessory. Also
do not use acid or alkaline cleaners to clean this
accessory.
Wipe up spilled brake or battery fluid at once as
they may damage the surface.
HOW TO USE THE GRIP HEATER
• For operating instruction, see the Owner's
Manual.
3 of 22
Advertisement
