Advertisement
TOP BOX (58 L)
TOP BOX
BACKREST
• The weight of the cargo must not exceed the
following maximum weight capacity:
6.0 kg (13.2 lb)
• Be sure that the top box is installed securely
before riding.
• Before riding, confirm that lid is closed and
remove the key.
• The top box is not perfectly watertight, and water
may enter when washing the motorcycle, when it
rains, etc.
• To prevent burns, allow the engine, exhaust
system, radiator, etc., to cool before installing and
removing the accessory.
• Do not store valuables or fragile articles in the top
box.
• Don't place a heavy object on the opened lid or
apply an excessive force from the top of opened
lid.
• Open and close the lid gently.
• If the top box gets dirty, slightly push and clean
it with a sponge or a shop towel moistened with
a neutral detergent, remove the detergent with
clean water, and then wipe them dry with a clean
sponge or shop towel.
• Never use organic solvents such as gasoline,
thinner and benzine to clean this accessory. Also
do not use acid or alkaline cleaners to clean this
accessory.
Wipe up spilled brake or battery fluid at once as
they may damage the surface.
• When the surface of backrest turns white, wipe
away with a shop towel or like with water.
CRF1100A/A2/A4/D/D2/D4
Genuine Accessory User's Guide
TOP BOX
RELEASE
LEVER
RETAINING
TAB
CARRIER BASE
TOP BOX
HOOK
CARRIER BASE
HOW TO INSTALL THE TOP BOX
1. Insert the key and release the lock by turning
the key clockwise.
KEY
2. Insert the retaining tabs of the top box into the
hole of the carrier base with the release lever in
the pulled position as shown.
3. Position the hook of the top box on the carrier
base as shown.
<HOOK POSITION>
HOOK
18 of 22
Advertisement
