Risks With Repainting - Axis P13-E Series Repainting Instructions

AXIS P13-E Series
Impact on warranty
Impact on warranty
This product is approved for repaint by Axis, provided that you follow the instructions in this document and at
axis.com/warranty-implication-when-repainting.

Risks with repainting

There are several risks when disassembling or assembling an Axis product. There is always a certain yield loss during assembly. Training
of operators and the use of correct tools mediates some of the problems but they can never be fully avoided. Some of the risks include:
ESD Damage - Always handle the product in an ESD safe environment. Even if precautions are taken there is always a risk of ESD
damage. The damage can remain undetected and cause problems during the lifetime of the equipment.
Dust contamination - Opening a camera may expose the lens and sensor to dust or paint. Dust will affect the optical performance.
Lenses need to be disassembled in a dust-free environment, preferably a cleanroom.
Paint overspray - Masking the different components of the equipment is critical. Failure to mask sensitive areas can cause problems
with assembling the equipment. Any areas that are not painted at factory or have a different surface treatment than the rest of the
parts (threads, ground and electrical contact surfaces) must also be masked to ensure function.
2