Advertisement
Programme – one side or large compartment only
1.
Add food to your chosen accessory and place inside the cooking compartment, then close the door.
2.
Press the power button ( ).
3.
Press the compartment button '1' or '2' according to where you've placed the food (not required when the Middle Partition is
removed).
4.
Choose the desired Function or Preset, or Manual.
5.
If necessary, adjust the time ( ) or temperature ( ) using the (+) and (-) buttons.
6.
Press Start (
).
Programme – both sides with the same settings (MATCH available)
1.
Add food to your chosen accessories and place inside the cooking compartments, then close the doors.
2.
Press the power button ( ).
3.
Press the Match button (1=2). The digital displays over both sides will be on during programming because these settings will
apply to both sides (so you don't have to programme each side separately).
4.
Choose the desired Function or Preset, or Manual.
5.
If necessary, adjust the time ( ) or temperature ( ) using the (+) and (-) buttons.
6.
Press Start (
).
Programme – both sides with different settings (SYNC available)
1.
Add food to your chosen accessories and place inside the cooking compartments, then close the doors.
2.
Press the power button ( ).
3.
Press the Button '1' to programme that compartment.
4.
Choose the desired Function or Preset, or Manual.
5.
If necessary, adjust the time ( ) or temperature ( ) using the (+) and (-) buttons.
6.
Press the Button '2' to programme that compartment and repeat steps 4 and 5. You can even choose the same function or preset
but with a different time or temperature if you wish.
7.
If each side has different cooking times but you wish both to finish together, press the SYNC button (
NOTE: to ensure optimum cooking there is a maximum holding time difference allowed between each side. If you require a
greater time difference than the unit will allow then delay adding your food to that side by that extra amount of time.
8.
Press Start (
).
Cooking
1.
After pressing Start (
) the cooking compartment light will illuminate, the heat and fan will switch on and the time display will
count down.
2.
The light button ( ) can be pressed during cooking if you need to check your food with the door closed. It will automatically switch
off after 30 seconds.
3.
Press the Start/Pause button (
) at any time to pause cooking, which suspends the time and switches off the heat. Re-press the
button to continue cooking.
4.
Opening the door during cooking will pause the programme, suspend the timer and switch off the heat. Closing the door will
automatically restart the programme and continue cooking.
5.
An audible alert will sound (5 times) and display 'FLIP' halfway through your programmed time as a reminder to turn your food or
shake the basket for even cooking (see Air Fryer cooking chart for more details).
NOTE: If your food does not require turning you can ignore the beep. The audible alert will not sound when the bake or roast
function are in use because foods cooking under these settings are unlikely to require turning.
6.
Both compartment lights will illuminate 1 minute before the end to alert you that cooking is almost finished.
7.
When cooking is finished an audible alert will sound (3 times) and the compartment lights will illuminate for 10 seconds before the
Air Fryer automatically turns itself off.
8.
Press the Power button ( ) at any time to cancel cooking or to re-programme.
6
VDF130_23EM3 (UK).indd 6-7
VDF130_23EM3 (UK).indd 6-7
Additional Functions
•
Turbo Crisp: If your food needs a final crisping, you can use the Turbo Crisp function for an additional 10 minutes of cooking:
when normal cooking has finished press this button (it defaults to 10 minutes) and press Start (
•
SYNC (
): Automatically syncs both cooking compartments to finish cooking at the same time even if they have different
cooking times. The compartment with the longest cook time will start first, then the shorter cook time will begin, allowing both
compartments to finish at the same time. This is ideal for cooking fast food style items, whether frozen or chilled. The maximum
time difference between each side is pre-set to maximum 45 minutes, to allow the finished food quality of both compartments
to be at their optimum. If you mistakenly set a time difference greater than 45 minutes the display will flash and both timers will
return to zero, and the air fryer will not start. Simply re-program the timers to be within the maximum difference of 45 minutes,
press Sync (
), then Start (
•
MATCH (1=2): The match button automatically sets both cooking compartments to the same time and temperature. This
function can be used if you are cooking a large amount of the same food or different foods with the same cook time and
temperature.
NOTE: When using the Sync or Match function both cooking compartments will pause cooking if only one door is opened. This
is to allow the food to finish cooking at the same time. Once both doors are closed cooking will continue.
Helpful tips
1.
The function temperature and timer are guidance only, please see Air Fryer Cooking Chart for details.
2.
During cooking if the door is left open for 5 minutes or more the Air Fryer will go to sleep. Press the Power button ( ) to wake the
Air Fryer.
3.
To remove the cooking baskets from the Air Fryer, you can use the removable handle. Squeeze the handle to insert into the clasp
on the basket and use the same action to remove the handle. DO NOT remove the hot baskets without the handle.
4.
Use a thick kitchen towel or oven proof gloves to remove trays from a warm cooking compartment.
5.
After cooking carefully remove food with a heat safe cooking utensil. Do not put hot baskets, trays or food on a surface which is
not heatproof. Use caution when tipping the baskets to remove food, to avoid spillage of oil or hot liquids.
6.
The large and small cooking trays can be stored in the drawer when not in use. The smaller roasting trays and mesh baskets will
nest into the large roasting tray to be placed in the storage drawer.
7.
The cooking baskets can be stored in the cooking compartments when not in use.
).
8.
During programming, or after a door is opened during cooking, the Air Fryer will automatically switch off if no user interaction
within 5 minutes. Press the Power button ( ) to restart programming.
9.
If one side is already cooking and you wish to add food to the other side, simply press pause, then programme the other side as
per the instructions 'Programme - one side or large compartment only.' Now add your food and press start. Both sides will now
cook together.
10. DO NOT use metal utensils in combination with the accessories. It is recommend to use silicone based utensils.
11. When baking, we recommend placing bake-ware on top of the small or large roasting tray, this allows air flow underneath the
bake-ware. The baskets, with the airflow trays removed are also suitable for baking.
Cleaning & Maintenance Of Your Air Fryer
1.
Clean the Air Fryer and accessories after each use.
2.
Before cleaning your Breville
3.
To clean the interior of the Air Fryer wipe with a damp cloth using only mild, soapy water. DO NOT IMMERSE IN WATER.
Abrasive cleaners, scrubbing brushes and chemical cleaners will damage the Air Fryer.
4.
Empty the Air Fryer baskets and trays frequently to avoid accumulation of crumbs.
5.
Baskets, trays, removable divider and handle are all dishwasher safe.
) to begin cooking.
Air Fryer, unplug it and allow it to cool.
®
).
7
2023/11/9 16:59
2023/11/9 16:59
Advertisement
