4. Troubleshooting
4.4. Buyer-Region Code Setting Method
4.4.1. The inserting method of Region Code after replacing the Main PBA
NOTE
•
When replacing the Main PBA and System Micom should be inserted the region code.
•
The set is not working properly if you don't insert the region code.
•
The region code is inserted by the remote control.
1) During "AUX" status.
•
MX-F870/850/830/830B : Push the 'ENTER' button 5 seconds.
<MX-F870/850/830/830B>
2) When displayed 'TEST", import 46 to set the buyer.
3) When displayed '– – –', import the buyer code.
The buyer setting code can find in the table named "MX-F6**_Opption_Table".
4) It will show the buyer that you set up. Then the buyer setting is succeed.
4-10
Copyright© 1995-2013 SAMSUNG. All rights reserved.