4.4. Buyer-Region Code Setting Method
4.4.1. The inserting method of Region Code after replacing the Main PBA
NOTE
•
When replacing the Main PBA and System Micom should be inserted the region code.
•
The set is not working properly if you don't insert the region code.
•
The region code is inserted by the remote control.
1) Change to "AUX1" function, and then push the 'ENTER' button about 10 second;
2) When displayed 'TEST', input 46 to set the buyer;
3) When displayed '– – –', input the buyer code, refer to the follow Option Table;
4) It will show the buyer that you set up. Then the buyer setting is succeed.
Copyright© 1995-2013 SAMSUNG. All rights reserved.
4. Troubleshooting
4-10