Miele Scout RX3 Runner Operating Instructions Manual page 58

Hide thumbs Also See for Scout RX3 Runner:
Table of Contents

Advertisement

en
and the Scout RX3 Home Vision HD up
to 170 minutes*.
*measured in cleaning mode Silent, in a
standard environment according to IEC
62929:2014
Rechargeable battery status indic-
ator in the control field
Red
Charged capacity
approx. 0 % – 20 %
Charged capacity
Orange
approx. 20 % – 50 %
Green
Charged capacity
approx. 50 % – 100 %
Setting the time of day (Fig. 11)
(also possible via a mobile device, see
"Miele@home")
You can choose between a 24-hour
clock and a 12-hour a.m./p.m. clock.
Use the remote control to set the time
of day.
 Briefly press the Clock button.
24h will appear in the display.
 Press the OK button if you want a 24-
hour clock.
 Press the + button if you want a 12-
hour a.m./p.m. clock and confirm 12h
with OK.
The hour display flashes in the display.
 Press the + or - direction button to
set the current hour.
 Press the OK button to confirm your
selection.
The minute display flashes in the dis-
play.
58
 Press the + or - direction button to
set the current minutes.
 Press the OK button to confirm your
selection.
If you want to alter the time of day, pro-
ceed as described above. Press the
Clock button for 3 seconds.
Defining the area to be
vacuumed (Fig. 12)
(also possible via a mobile device, see
"Miele@home")
You can define any areas which the ro-
bot vacuum cleaner should not have
access to.
The robot vacuum cleaner is 85 mm
high.
Any items under which vacuuming is
required should have a minimum
clearance of 87 mm.
 Place the magnetic strip supplied
with the groove facing downwards on
the floor.
The robot vacuum cleaner will not cross
over the magnetic strip.
Adhesive strips are supplied for per-
manent fixing. Additional magnetic
strips are available to order from the
Miele webshop.

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Hs18

Table of Contents