Sony KE-55XH9096 Installation Information page 11

6
Drill lower pilot holes on the
marks. (Refer step 4 for the drill
instruction.)
7
Fit the suitable screws and
washers to the holes.
Note
 Use a level to check whether the Wall-Mount Bracket
is level.
8
Pull out the arm of the bracket
to the end.
Preparing for the installation
of the TV or LCD Monitor
Make sure to attach the Table-Top Stand
before installing the TV or LCD Monitor to the
wall by referring to the Setup Guide.
1
Remove the screws from the
rear of the TV or LCD Monitor.
Note
 Be sure to store the removed screws and unused
parts in a safe place, keeping them away from
children.
− 11 (GB) −
GB