Table of Contents
Advertisement
Press Fn + F11 to access the integrated keypad. When activated, the keys
with gray markings on the bottom edge become numeric keypad keys.
Refer to the
how to operate these keys. The power on default for both settings is off.
Press Fn + F12 to lock the cursor on a specific line. The power on default is
off.
Hot keys
Mute:Turns the volume on and off.
Lock: Enters "Lock computer" mode. To restore your desktop, you need to
log on again.
Power plan: Displays the power save modes and lets you change the
power settings.
Sleep: This hot key switches the system to Sleep Mode.
Hibernate:This hot key switches the system to Hibernation Mode.
Output: Changes the active display device.
Default resolution for simultaneous mode is set to 1024 × 768. If you
connect an RGB (Monitor) that is not set to a 1024 × 768 resolution,
change it in "Display Properties".
Brightness (decrease): Turns the monitor brightness down.
User's Manual
Keypad overlay
+
+
+
+
+
+
+
section in this chapter for more information on
The Keyboard
5-3
Advertisement
Table of Contents
