Siemens WG44B2ALDN User Manual And Installation Instructions page 25

Button
iDOS 2
Ready in
(Temperature)
(Spin Speed)
(mains switch) ¡ Switch on
Remote Start
⁠ 3 sec.
Basic Settings
Selection
¡ Activate
¡ Deactivate
¡ Dispenser con-
tents
¡ Basic dosage
Up to 24 hours
- 90
- 1400
¡ Standby mode
¡ Activate
¡ Deactivate
¡ Open the
Home Connect
menu
¡ Activate
¡ Deactivate
Multiple selection
More information
Briefly press the button to activate or
deactivate the intelligent dosing sys-
tem for fabric softener
tergent .
Press the button for approx. 3
seconds to specify the contents of the
dispenser or set the basic dosage.
→ "Intelligent dosing system",
Page 35
Set the programme end time.
The programme duration is already in-
cluded in the set number of hours.
Once the programme has started, the
programme duration is displayed.
Note: Press
play shows the required setting.
Adjust the temperature.
Set temperature in °C.
Adjust the spin speed or activate
(Rinse Hold).
Set spin speed in rpm.
If is selected, the water is not
drained at the end of the washing
cycle and the spin cycle is deactiv-
ated. The laundry remains in the rins-
ing water.
Switch on the appliance or put it in
standby mode.
→ "Remote start", Page 39
→ "Childproof lock", Page 35
→ "Basic settings", Page 41
Buttons en
or liquid de-
or until the dis-
25