Siemens WQ45G2IADN User Manual And Installation Instructions page 14

Table of Contents

Advertisement

en Installation and connection
hose to drain away excess condens-
ation directly into the waste water
system.
Notes
¡ Operate this appliance using the
water drain hose provided. If you
connect the water drain hose
→ Page 14, you do not have to
regularly empty the condensation
container → Page 32.
¡ You can order this optional
→ "Accessories", Page 28 from
our customer service.
Connecting the water drain hose
If you do not want to regularly empty
the appliance's condensation con-
tainer, connect the water outlet hose.
ATTENTION!
When operating the appliance
without the water drain hose being
connected properly, liquid may leak
out of the connecting piece.
Before operating the appliance,
connect the water drain hose prop-
erly to the connecting piece.
Requirements
¡ The appliance and the accessory
have been unpacked.
→ "Unpacking the appliance",
Page 12
¡ The appliance is installed at the in-
stallation location.
→ "Requirements for the installa-
tion location", Page 13
14
Pull out the condensation hose
1.
from the connecting piece.
The condensation hose is connec-
ted to the connecting piece at the
factory.
Note: When removing the con-
densation hose, liquid may leak
out of the connecting piece.
Push the condensation hose into
2.
the holder.

Advertisement

Table of Contents
loading

Table of Contents