Quick Setup; How To Create A Mesh Network - Acer Connect Vero W6m User Manual

6.

Quick Setup

The Acer Connect Vero W6m can
operate as a standalone WiFi
router, Bridge, or establish a Mesh
network. Please select a mode
which this device will operate in:
1) Router Mode
2) Mesh Controller
3) Mesh Agent
4) Bridge mode
In Router mode, plug one end of the
RJ-45 cable into your DSL or cable
modem and the other end into
Acer Connect Vero W6m's WAN port.
Connect your device to Predator
Connect W6m via WiFi or LAN cable.
6.1

How to create a Mesh network

To create a mesh network,
set one router as a Mesh controller
(A) and set another router as a Mesh
agent (B)
Note: To keep a better performance,
please be aware that a controller could
only have 3 agents under its network.
For the fourth agent, it will be
performed factory reset after
connecting to the mesh network and
switched back to router mode
automatically.
11 11