Advertisement
IOU L411 USC LUC WM/WWII\ UULWII
VII
LUC Jll1C
of the telephone to clear the last digit if you have
entered the wrong number.
• Press the
SECRECY
(Program) button to confirm.
The LED will stop flashing and the number is
now stored. The display will show
1
Stored.
QUICK
DIAL
To dial a number stored using the QUICKDIAL
memory
Cam) 0
• Lift the handset.
• Press the
QUICKDIAL
button and then the
number (0 to 9) under which the number you
want is stored. The number is shown on the
display and dialled automatically.
You cannot delete stored numbers but it is possible to
overwrite them simply by storing another number in the
same memory location.
If disconnected from the telephone line, numbers
stored in the memories will be retained for a
minimum of 10 minutes.
General information
Guarantee
Within the 12-month guarantee period:
BT guarantees the product for 12 months from the purchase date if the
goods have only been used for their intended purpose, and have not been
subjected to misuse, or been wilfully or accidentally damaged.
The goods have not been tampered with or repaired by anyone other than
ITT, its staff or agents. If a fault does occur in this product, and you
bought the unit yourself, provided that you return it to the place of
purchase and produce your receipt, it will either be repaired or replaced
free of charge. The terms and conditions of this guarantee do not affect
your statutory rights.
Outside the 12-month guarantee period:
If your product needs repair after the guarantee period has ended, the
repair must meet the approval requirements for connection to the
telephone network. We recommend that you call ITT on
Freefone 0800
800 150,
or visit your nearest
131'
shop, and you will be informed of our
recommended repair agents.
IV
biLlre d IlUITIL/e1ly
(M1, M2, M3)
r. (iL) r•
(.2_) 5
)
• Press the
SECRECY
(Program) button. The LED
will start to flash.
• Press the
MEMORY
button
(MI., M2,
or
M3) •
under which you want to store the number. The
display will show the location you have chosen,
e.g.
MEMORY
1.
• Use the keypad to enter the telephone number
(up to 32 digits).
• You can use the
UP/DOWN
button on the side of
the telephone to go back and delete if you have
entered the wrong number.
• Press the
SECRECY
(Program) button.
The LED will stop flashing and the number is
now stored.
The display will show
MEMORY
1
Stored.
To store a pause in the dialling sequence of a memory
•
number, e.g
9,
pause,
6,
press the
REDIAL
button.
To dial a number stored using the MEMORY buttons
(M1, M2, M3)
(An) Cl±fL) A
U2
3
• Lift the handset
• Press the
MEMORY
button
(M1, M2,
or
M3)
under which the number you want is stored.
The number is shown on the display and dialled
automatically.
To store a number using the QUICKDIAL memory
Cam
)
(auclool
C
sw
)
• Press the
SECRECY
(Program) button. The LED
will start to flash.
• Press the
QUICKDIAL
button and then a number,
0 to 9, under which you want the number stored.
The display will show the location you have
chosen, e.g.
1
QUICK
DIAL
• Use the keypad to enter the telephone number
(up to 32 digits).
Advertisement
