EAE MONA SWITCH V2 Product Manual page 25

Product Manual Mona Switch V2
EAE KNX Mona Series
Roller Shutter
When "Controller Type" configured as "Blind/Roller/Awning Function" lamella operations of blind control
will be disabled and "short press" will only stop the movement of the blind. "Button Function" parameter
enables the use of push button 3 different ways;
Up: "Short Press" moves the blind upwards; "Short Press" stops the blind.
Down: "Short Press" moves the blind downwards; "Short Press" stops the blind.
Toggle: "Short Press" action moves the blind downwards – stops – upwards – stops.
For example, if last state was up, when push button short pressed it will send "Stop" telegram.
Every time push button short pressed it will follow the steps below.
Down -> Stop -> Up -> Stop
Note: If Top or Bottom Position object gets a value "1" and short pressed, blind will be driven opposite way.
EAE Technology
©
www.eaetechnology.com
MONA Switch R3.0
Page 25 / 34